Holy Precision supply motorcycle parts for Ducati, in-stock item could be arranged the shipment within 24hours after payment done, out-of-stock items could be started the production within 12hours.
All materials are in high-strength and available to change, finish is smooth, machining is precision, with free etching logo service.
If the list don’t have the items you looking for, welcome to send us sample or files, we can check and measure, then make them for you as per your requirements.
Email: admin@holyprecision.com
HD001: The Clutch Spider Tool holds the centre hub and the outer basket to allow removal of the centre nut and eliminates damage to the pillars on the aluminium clutch assembly.
Applicable Models: Designed to fit the standard OEM 12 tooth basket for Ducati Engine 1991-2007.
Notes: Clutch Spider Tool essential when removing any Ducati dry clutch
HD001-2: Direct bolt on to crank case; The Clutch Tool holds the centre hub and the outer basket to allow removal of the center nut and eliminates damage to the pillars on the clutch assembly.
Applicable Models: Designed to fit the standard OEM clutch on Panigale 899 859 1199 1299 V4.
Notes: Clutch Spider Tool essential when removing any Ducati dry clutch
HD002: Alternator Cover Pulling Tool with two hold-down bolts. Work on all Ducati Engines 748 ccm to 1198 ccm.
Applicable Models: Work on all Ducati Engines 748 ccm to 1198 ccm.
Notes: The product with two hold-down bolts
HD003-1: Ohlins Front Axle Alignment Tool. Works on all Olins forks fitted with a 29mm diameter axle centre hole.
Applicable Models: Works on all Olins forks fitted with a 29 mm diameter axle centre hole.
Notes: Aluminum 6061; Sandblasted & Glossy Black Anodized; Free etching logo
HD005-1: Cam Wheel Nut Tool will be used for the disassembly of the cam belt gears. The tool holds the timing gear wheels secure in place while at the same time the retaining nut can be removed or tightend.
Applicable Models: -
Notes: Aluminum 6061; Sandblasted & Glossy Black Anodized; Free etching logo
HD006: Steering Stem Nut Tool fits all Ducati's with a perforated top nut. Using this tool is the only way to check the torque on the steering stem nut, or for its removal and assembly.
Applicable Models: This tool fits all Ducati's with a perforated top nut.
Notes: Aluminum 6061&Steel; Sandblasted & Glossy Black Anodized; Free etching logo
HD007: Chain Adjuster/Swingarm Eccentric Tool fits all Ducati with single-sided swingarm.
Applicable Models: This tool fits all Ducati with single-sided swingarm.
Notes: Aluminum 6061; Sandblasted & Glossy Black Anodized; Free etching logo
HD009-V1: Dry Clutch Basket with 4pc Bolts 10.9 grate / high tensile strength,fit for the Ducati modells from 1992-2012.
Applicable Models: This tool fits for the Ducati modells from 1992-2012.
Notes: Aluminum 6061/7075; Sandblasted & Hard-Anodized(50μm); Free etching logo
HD009-V2: Dry Clutch Basket with 4pc Bolts 10.9 grate / high tensile strength,fit for the Ducati modells from 1992-2012.
Applicable Models: This tool fits for the Ducati modells from 1992-2012.
Notes: Aluminum 6061/7075; Sandblasted & Hard-Anodized(50μm); Free etching logo
HD020: Front/Rear Wheel Nut Tool 30mm front-55mm rear wheel for installing and removing 55 mm & 30mm external wheel nut.
Applicable Models: This tool is for installing and removing 55 mm and 30 mm external wheel nut.
Notes: Aluminum 6061; Sandblasted & Glossy Black Anodized; Free etching logo
HD020-1: Wheel Socket Nut Tool 41mm front-46mm rear wheel, for installing and removing wheel nut and drive side external wheel nut.
Applicable Models: This tool is for installing and removing wheel nut and drive side external wheel nut.
Notes: Aluminum 6061; Sandblasted & Glossy Black Anodized; Free etching logo
HD020-3: Wheel Socket Nut Tool 30mm front-46mm rear wheel, for installing and removing wheel nut and drive side external wheel nut.
Applicable Models: This tool is for installing and removing wheel nut and drive side external wheel nut.
Notes: 30 mm front axle socket nut fits front wheel axle; 46 mm Bi-Hex sockets fits rear wheel axle. The Socket tool has a 1/2" square hole that fits a standard ratchet / torque wrench.
Aluminum 6061; Sandblasted & Glossy Black Anodized; Free etching logo
HD026: Clutch Spring Alloy Collar Cap Kit. Includes 6pc aluminum caps/ 6pc stainless steel springs/ 6pc stainless steel bolts
Applicable Models: This tool is replacement for the original clutch spring collar caps and springs for Ducati 6 speed dry clutch systems.
Notes: -
Rocker Arm Tool Set: enables you to properly make your own desmodromic two valve adjustments and Cylinder Head work.
Applicable Models: This tool set will work on all 2 valve Ducati F1 and Pantha engine.
Notes: Includes 1 Rocker Arm puller/ 1 Rocker arm axle pin/ 1 Rockerarm spring instalation tool
Crankshaft Turning Tool.
Applicable Models: Works on all 4 and 2 vale Ducati engine 350, 500, 600, 620, 748, 749, 750, 800, 848, 851, 888, 900, 916, 996, 998, 999, 1000, 1098, 1198, 1199, 1299 SUPERSPORT.
Notes: Turn your Crank, set timing, install belts, check valve clearance. Or just crank/turn your engine when in storage